Smart home maintenance tips to keep your Salinas system in top shape

Maintenance is vital to numerous parts of our lives. You go to the gym to keep your body fit and take your vehicle to the mechanic so it runs properly. Your Salinas smart home is no exception. While it requires less attention than your family SUV, you still must do a few things to keep devices operating properly. It’s not difficult, and we’ll make the job even simpler with the following smart home maintenance recommendations.

Clean Hardware Is Key To Reliable Function

Dust and dirt are hazards to video camera lenses, sensors, and all types of electronics. How effectively do you suppose your outside surveillance will spot trespassers if it’s obscured by cobwebs? Your smart home won’t appear so smart if it’s not working as intended. But you can lend a hand by performing these easy maintenance duties:

• Keep your lenses spotless by wiping them down periodically with a microfiber towel gently moistened with glass cleaner. Avoid paper towels that can damage the lens, and never spray a cleaner directly on the camera.
• Prevent dust from collecting on delicate electronics. If contaminants work their way inside the protective exterior, it can damage those sensitive electrical parts and hinder needed airflow. Even your central interface’s flat, narrow top can gather dust.
• When cleaning or dusting, do a short check to make sure your tools are connected solidly and placed properly.

It’s easy to keep your smart home devices dirt-free, but you should do a couple of other things to promote error-free functionality.

Perform a quick test of your Salinas security system

Have you not gotten a smartphone notification in a while? Your system could be working great, and your home well guarded, but it may also indicate something is malfunctioning. How about finding out by performing a brief check of your devices? Here’s how to proceed:

• Take on the part of a burglar and try to set off your access point sensors, motion detectors, or whatever devices you have. You can typically put your system into “test mode” to avoid contacting your monitoring agents.
• Launch your home security cell phone app and examine the video stream. Ensure the images are sharp and the camera is aimed where it needs to be.
• If you have automation programmed, verify it. Did the smart thermostat change settings at the proper time? Did your lights come on as expected?
• Make sure batteries are replaced periodically. Some systems will even alert you when replacement is needed.

Inspections may be done periodically or any time you suspect a sensor is not functioning as it should.

Is your system firmware updated?

Those smart tools you have across your house don’t just run independently. These connected instruments have firmware in place, so they perform properly. In many instances, the firmware will self-update, but not always. Run the updates as soon as they’re ready (your system will likely notify you) to steer clear of errors or security issues.

Get a low-maintenance smart home in Salinas from Vivint

Interested in a dependable, easy-to-maintain smart home in Salinas? Connect with the home security specialists at Vivint. Offering the best in home automation and exterior surveillance, we have the right system for your residence. Call (831) 400-5196 right away to design your home’s security.